Mi$$ionRobots

4/27/18 Today we still kept on running our program for the figure eight. The problem lies in the fact that every time we run it some thing wrong happens and it is different every time. But we hope next class can be our official because we can basically do 90% of the two figure eights. By Isaac

4/23/18 Today we finished the figure eight and are ready to show it for the official. We have also charged the batteries because it has been not been running as smoothly. Now that we are finished with this we can move on to the next robot: clawbot.                              By Jesse

4/20/18 Today we were still doing our figure eight and we our almost done with it. So far we have done one of our figure eights out of two. The challenging part is the second one because you can't just copy and paste the code. But, we are coming along and can probably finish by next week.               By Isaac

4/17/18 Our goal for this week is to finish the programming for the robot. So far we can do one figure eight, but we just need it to do the other one. Also we need to tighten the bolts for our robot because it is starting to come apart.      By Jesse

Views

4/13/18 Today I finished the assembly of the squarebot and put together all the views. Jesse did the programming and finished up doing the figure eight. We both met our task even though we had to do it quickly and finish today.               By Isaac

4/9/18 This week we plan to finish our figure eight and our assembly. We charged our batteries and can now effectively test our robot to complete the challenge. Isaac has the task of finishing the robot assembly. I have the task of finishing up the programming, which is almost done.             By: Jesse

April 5, 2018 Today, Isaac and I have given ourselves tasks to complete by our due dates. Isaac has started the process of assembling the square bot in Solid Works. My responsibility is to start the beginning of the programming. I will do this in Lunch B today with a little guidance from Benjamin.                  By: Jesse  

4/3/18 Our goal for this week is to get through building our squarebot in solidworks. We have gotten most of our parts and just need to assemble it. Also, this week we will try our best to get to programming our robot so that it does the figure eight. So far before we did that we fixed the drive in our wheels because they were reversed. Now we are measuring things out for programming.                  By Isaac